304 North Cardinal St. Dorchester Center, MA 02124
BTF-LIGHTING 5in1 WB5 2.4GHz WiFi PWM LED Controller Compatible with Alexa Google Home Smart Life Tuya Smart APP Control For Dimming CCT RGB RGBW RGBCCT LED Strip Work with…
【5 in 1 WiFi PWM Controller】WB5=C01W+C02W+C03W+C04W+C05W.C01W=Single Color,C02W=CCT (Dual White),C03W=RGB,C04W=RGBW, C05W=RGB+CCT.This Controller supports PWM monochrome, CCT, RGB, RGBW, RGB + CCT, WW+CW LED strip.Switch mode by one setting button.
【PWM LED Type】The operating voltage range is DC12V-24V.Without IC chip PWM LED.Single color 2 wires, CCT 3 wires, RGB 4 wires, RGBW 5 wires, RGBCCT 6 wires FCOB 5050 3528 5630 5730 3014 etc LED string strip bulb lamp.Power: 6A/Channel Total output max 15A .DC12V 180W max. DC24V 360W max.
【3 control methods】1st:Compatible 2.4GHz RF Remote LM087,LM007,LM096,LM091,WR01RF,WR02RF,RC01RFB,RC02RFB,RC03RFB,RC04RFB,RC05RFB 2nd: Tuya Smart ,Smart Life APP 2.4GHz Wi-Fi control. 3rd: Alexa, Google Home Assistant control.Three methods can be used at the same time.
【Multi-function】16 millions of RGB colors.Color temperature 2700K-6500K.Dim Brightness/saturation.Group control.Multi zone control. Voice command.Timmer setting.Countdown turn on/off.Biorhythm. Tap-to-Run and Automation. Secene customization. Sleep/wakeup plan .Do not disturb mode.Device sharing. Selection of different usage scenarios.
【Auto-transmitting function】Only for remote control dimming. One controller can transmit the signal from the remote control to the another controller within 30 meters. As long as there is a LED strip controller within 30 meters, the remote control distance can be limitless. All the controllers should be the same group.
【Auto-Synchronization Function】Different controllers can work synchronously when they are started at different times, controlled by the same remote control at the same dynamic mode and with the same speed.
【Using WiFi+ Bluetooth dual module design】When WiFi router disconnect,bluetooth connection control is a backup control methods.
Brand
BTF-LIGHTING
Manufacturer
BTF-LIGHTING Technology Co., Limited
Part Number
MiBoxer WL5
Item Weight
2.46 ounces
Product Dimensions
4.92 x 1.38 x 1.1 inches
Country of Origin
China
Item model number
MiBoxer WL5
Assembled Height
2.8 centimeters
Assembled Length
12.5 centimeters
Assembled Width
3.5 centimeters
Item Package Quantity
1
Style
Modern
Color
White
Shape
Square
Material
Plastic
Number of Lights
150
Voltage
24 Volts
Specific Uses
Indoor use only
Special Features
Remote Controlled, Dimmable, Adjustable, Timer, AppControl, Color Changing
Light Direction
Adjustable
Power Source
Corded Electric
Batteries Included
No
Batteries Required
No
Type of Bulb
LED
Wattage
360 watts
Bulb Features
Dimmable
Average Life
50000 Hours
439 reviews for BTF-LIGHTING 5in1 WB5 2.4GHz WiFi PWM LED Controller Compatible with Alexa Google Home Smart Life Tuya Smart APP Control For Dimming CCT RGB RGBW RGBCCT LED Strip Work with…
Rated 5 out of 5
Amazon Customer –
Works great! But, the linking instructions shown in the product description are incorrect!
After trying those instructions multiple times and failing every time, I tried a procedure listed in an answer from btf-lighting support about syncing the miboxer version to a FUT036W controller and they worked!
These are the correct steps to sync the BTF-LIGHTING WR02RF Wireless remote to BTF-LIGHTING 5in1 WB5.
1. Unplug the power supply feeding the WB5 controller. This step is required. 2. Wait 10 seconds 3. Plug the power supply back in. 4. After the lights come back on, press the DASH symbol on the appropriate zone (1,2,3,4) – key 3 times. 5. After the third press the LED strip will blink slowly 3 times then stop blinking. The LED light strip will be lit.
To sync additional WB5 controllers to the WR02RF simply repeat the process for each controller, selecting appropriate zone number.
Enjoy your lighting!
If anyone is interested these are the products I used to install under cabinet lighting in our recently remodeled kitchen.
1 each – BTF-LIGHTING FCOB COB CCT Flexible High Density LED Strip – Search ASIN# B08Q3RKCZH 2 each – BTF-LIGHTING 5in1 WB5 2.4GHz WiFi LED Controller – Search ASIN# B08L9GWJK1 1 each – BTF-LIGHTING WR02RF Wireless 2.4G RF 4 Zone Remote – Search ASIN# B096VM7JV6 2 each – BTF-LIGHTING 24V 5A 120W Power Supply – Search ASIN# B0BNQ5W2BH 1 each – Muzata 6PACK 3.3FT/1M Flexible Silver LED Channel – Search ASIN# B07P7NYSQ7
Rated 5 out of 5
Marco V74 –
I brought C04W and WR01RF to use with LED 5050RGB+Cool. At first, I had a problem connecting the product as 1-star reviews stated, but then I double-checked and finally got it. See the steps I did below to get the controller to work:
1. Download the Tuya Smart app, create an account, turn on your Bluetooth, and connect your phone to your house Wi-Fi. Go to the Plus sign to add a device and leave your phone on this page.(it should show at the top that it is searching for device nearby) 2. Turn off your light for more than 10 seconds, turn it on, and within 3 seconds, press a button on the C04W and hold until the your room LED light flashes. 3. Go back to your phone. It should discover the device and ask for your Wi-Fi password. Enter your Wi-Fi password, and it should add the device for you within 5-10 seconds. 4. At this stage, you should be able to control the light using your phone. 5. To connect WR01RF, turn off the light again, wait for more than 10 seconds, turn on the light, and almost immediately when the light is on, tap “-” over the zone you want to set one time (sometimes, if you aren’t sure, you can tap again). Then it should connect.
it is quite a bit od challege to connect it as the instruction was not super clear but when it does. All work great
Rated 1 out of 5
DC –
If you use other smart devices this is a bad option. They use web services that force you to go through an insanely complex setup to ping their service that the round trips back to your house and pings your hub to then tell this device what to do, introducing a whole host of reliability problems, latency, security weakpoints, setup headaches, and api fees.
Even after a lengthy setup, it fails constantly. Hardware seems fine, the software is trash.
Rated 5 out of 5
Tinder –
Was very easy to setup in the app. Ended up buying more so now I have 6 in total. They work great and will end up getting more. They dont use much space and can take your light strips from dim to daylight.
Rated 5 out of 5
S. Manz –
Hasta ahora funciona perfectamente, llegó muy bien empacado deberia de venir con su Transformador ya que es dificl encontrar uno que se ajuste a la entrada. Muy buen producto, hace un pequeño zumbido cuando la luz esta funcionando con dimmer y puede llegar a ser molesto despues de un rato.
Rated 5 out of 5
Amazon Customer –
I was ready to spend hours getting this RGB-CCT controller to work properly. But the app download was seamless. It took 2 minutes to configure it and connect to my WiFi with NO error messages. It’s been only 2 days, but the controller works as advertised with a 5m RGB-CCT LED strip light.
Rated 5 out of 5
Fernando Pérez –
Sostituito ad un vecchio controller rgb con telecomando, questo è decisamente molto meglio oltre a fare giochini ecc rapido e veloce , facile configurazione .. spero che duri tanto..
Rated 5 out of 5
Bill B. –
Check out my other reviews and you’ll see that I am objective and only praise truly awesome products. These are clearly designed carefully, with quality being a top priority. I’ve used several other control modules, some monochrome, some multi-color, some basic on/off switches others like this one, are truly versatile. The WB5 is a redesigned WL5, BTF replaced the screw terminals with spring locking clips. This change alleviates the need to re-torque screw terminals anytime the module or connected wires are moved. The previously purchased dimming control modules melted down when put under any stress. The other manufacturers seem always to over-state the amperage/wattage ratings. This controller will meet the design criteria and likely beyond, (I’m not suggesting over driving them.) The terminals are rated at 6 amps each, but the maximum module rating is 15 amps. I installed two of these control modules in a 180-watt light fixture with 90 watts cool white and 90 watts warm white SMD5630 LED strips, (84 LED bulbs per strip.) In my experience, mixing the color ratings usually results in errors and routine melt downs. But these BTF-Lighting control modules are designed to control pretty much any combination of mono chrome or RGB colored LEDs. I’m learning by doing and assembling my fixtures with the best value components that I can afford. I’d resigned myself to using a modular connectorized controller, rated at 96 watts, to control separate 45-watt banks of SMD5630 LED strips. But after suffering 4 separate melt downs, I looked for and found these BTF-Lighting Modules. I can’t say enough about the awesome technical support that BTF-Lighting provided via email. Their patience and persistence in helping me find the correct wiring scheme and setup has been exemplary. I’ve ordered a set of FUTO36W monochrome control modules offered by BTF-Lighting, as well and I promise I’ll carefully test and review that control module, as well. I am proud to be a customer of BTF-Lighting and I can’t thank them enough or say enough about how kind and genuine the support team has been. Thanks for reading! DJC
Rated 4 out of 5
Leigh Hayes –
Originally thought the device did not work. It has no indicator lights or any diagnosting help whatsoever. I started with a 2 amp power supply and had a LED strip attached to it. The device would blink the lights but it wouldn’t connect. I then removed the LED strip and then could add to smartlife app easily but when I put the lights on the controller, the controller would go offline. It will require more power than the strip itself so a power supply that may handle the strip may not be able to provide enough power for the controller and strip. A 5amp power supply worked fine.
When power is removed from the controller and restored, the lights will come on. It can be set to go to the brightness that it had when power was turned off or to a preset level. It does not have the option to save the on/off state that it had prior to power outage. You can turn on a “do not disturb” option which means when power is restored, the lights will not be turned on. To override this you would have to switch power to the controller twice within 5 seconds. This is a bit hard because 3 power switches and you put it into reset mode.
Finally, bluetooth control does work but you would need WIFI to begin with. When the device loses wifi, the device you used to set it up (maybe your phone) will switch to bluetooth control automatically. If the controller sees its wifi signal, bluetooth will not work.
Rated 5 out of 5
Tasia & Scott –
Great functionality, easy to install and app connectivity.
Amazon Customer –
Works great! But, the linking instructions shown in the product description are incorrect!
After trying those instructions multiple times and failing every time, I tried a procedure listed in an answer from btf-lighting support about syncing the miboxer version to a FUT036W controller and they worked!
These are the correct steps to sync the BTF-LIGHTING WR02RF Wireless remote to BTF-LIGHTING 5in1 WB5.
1. Unplug the power supply feeding the WB5 controller. This step is required.
2. Wait 10 seconds
3. Plug the power supply back in.
4. After the lights come back on, press the DASH symbol on the appropriate zone (1,2,3,4) – key 3 times.
5. After the third press the LED strip will blink slowly 3 times then stop blinking. The LED light strip will be lit.
To sync additional WB5 controllers to the WR02RF simply repeat the process for each controller, selecting appropriate zone number.
Enjoy your lighting!
If anyone is interested these are the products I used to install under cabinet lighting in our recently remodeled kitchen.
1 each – BTF-LIGHTING FCOB COB CCT Flexible High Density LED Strip – Search ASIN# B08Q3RKCZH
2 each – BTF-LIGHTING 5in1 WB5 2.4GHz WiFi LED Controller – Search ASIN# B08L9GWJK1
1 each – BTF-LIGHTING WR02RF Wireless 2.4G RF 4 Zone Remote – Search ASIN# B096VM7JV6
2 each – BTF-LIGHTING 24V 5A 120W Power Supply – Search ASIN# B0BNQ5W2BH
1 each – Muzata 6PACK 3.3FT/1M Flexible Silver LED Channel – Search ASIN# B07P7NYSQ7
Marco V74 –
I brought C04W and WR01RF to use with LED 5050RGB+Cool. At first, I had a problem connecting the product as 1-star reviews stated, but then I double-checked and finally got it. See the steps I did below to get the controller to work:
1. Download the Tuya Smart app, create an account, turn on your Bluetooth, and connect your phone to your house Wi-Fi. Go to the Plus sign to add a device and leave your phone on this page.(it should show at the top that it is searching for device nearby)
2. Turn off your light for more than 10 seconds, turn it on, and within 3 seconds, press a button on the C04W and hold until the your room LED light flashes.
3. Go back to your phone. It should discover the device and ask for your Wi-Fi password. Enter your Wi-Fi password, and it should add the device for you within 5-10 seconds.
4. At this stage, you should be able to control the light using your phone.
5. To connect WR01RF, turn off the light again, wait for more than 10 seconds, turn on the light, and almost immediately when the light is on, tap “-” over the zone you want to set one time (sometimes, if you aren’t sure, you can tap again). Then it should connect.
it is quite a bit od challege to connect it as the instruction was not super clear but when it does. All work great
DC –
If you use other smart devices this is a bad option. They use web services that force you to go through an insanely complex setup to ping their service that the round trips back to your house and pings your hub to then tell this device what to do, introducing a whole host of reliability problems, latency, security weakpoints, setup headaches, and api fees.
Even after a lengthy setup, it fails constantly. Hardware seems fine, the software is trash.
Tinder –
Was very easy to setup in the app. Ended up buying more so now I have 6 in total. They work great and will end up getting more. They dont use much space and can take your light strips from dim to daylight.
S. Manz –
Hasta ahora funciona perfectamente, llegó muy bien empacado deberia de venir con su Transformador ya que es dificl encontrar uno que se ajuste a la entrada.
Muy buen producto, hace un pequeño zumbido cuando la luz esta funcionando con dimmer y puede llegar a ser molesto despues de un rato.
Amazon Customer –
I was ready to spend hours getting this RGB-CCT controller to work properly. But the app download was seamless. It took 2 minutes to configure it and connect to my WiFi with NO error messages. It’s been only 2 days, but the controller works as advertised with a 5m RGB-CCT LED strip light.
Fernando Pérez –
Sostituito ad un vecchio controller rgb con telecomando, questo è decisamente molto meglio oltre a fare giochini ecc rapido e veloce , facile configurazione .. spero che duri tanto..
Bill B. –
Check out my other reviews and you’ll see that I am objective and only praise truly awesome products.
These are clearly designed carefully, with quality being a top priority. I’ve used several other control modules, some monochrome, some multi-color, some basic on/off switches others like this one, are truly versatile. The WB5 is a redesigned WL5, BTF replaced the screw terminals with spring locking clips. This change alleviates the need to re-torque screw terminals anytime the module or connected wires are moved. The previously purchased dimming control modules melted down when put under any stress. The other manufacturers seem always to over-state the amperage/wattage ratings. This controller will meet the design criteria and likely beyond, (I’m not suggesting over driving them.) The terminals are rated at 6 amps each, but the maximum module rating is 15 amps. I installed two of these control modules in a 180-watt light fixture with 90 watts cool white and 90 watts warm white SMD5630 LED strips, (84 LED bulbs per strip.)
In my experience, mixing the color ratings usually results in errors and routine melt downs. But these BTF-Lighting control modules are designed to control pretty much any combination of mono chrome or RGB colored LEDs. I’m learning by doing and assembling my fixtures with the best value components that I can afford. I’d resigned myself to using a modular connectorized controller, rated at 96 watts, to control separate 45-watt banks of SMD5630 LED strips. But after suffering 4 separate melt downs, I looked for and found these BTF-Lighting Modules.
I can’t say enough about the awesome technical support that BTF-Lighting provided via email. Their patience and persistence in helping me find the correct wiring scheme and setup has been exemplary.
I’ve ordered a set of FUTO36W monochrome control modules offered by BTF-Lighting, as well and I promise I’ll carefully test and review that control module, as well. I am proud to be a customer of BTF-Lighting and I can’t thank them enough or say enough about how kind and genuine the support team has been.
Thanks for reading!
DJC
Leigh Hayes –
Originally thought the device did not work. It has no indicator lights or any diagnosting help whatsoever. I started with a 2 amp power supply and had a LED strip attached to it. The device would blink the lights but it wouldn’t connect. I then removed the LED strip and then could add to smartlife app easily but when I put the lights on the controller, the controller would go offline. It will require more power than the strip itself so a power supply that may handle the strip may not be able to provide enough power for the controller and strip. A 5amp power supply worked fine.
When power is removed from the controller and restored, the lights will come on. It can be set to go to the brightness that it had when power was turned off or to a preset level. It does not have the option to save the on/off state that it had prior to power outage. You can turn on a “do not disturb” option which means when power is restored, the lights will not be turned on. To override this you would have to switch power to the controller twice within 5 seconds. This is a bit hard because 3 power switches and you put it into reset mode.
Finally, bluetooth control does work but you would need WIFI to begin with. When the device loses wifi, the device you used to set it up (maybe your phone) will switch to bluetooth control automatically. If the controller sees its wifi signal, bluetooth will not work.
Tasia & Scott –
Great functionality, easy to install and app connectivity.